Slicing software: Difference between revisions
Jump to navigation
Jump to search
Clayton.ford (talk | contribs) No edit summary |
Clayton.ford (talk | contribs) No edit summary |
||
| Line 3: | Line 3: | ||
Most slicing software starts with an [[.stl]] file and outputs the [[G-code]] file which contains the necessary instructions for the 3d printer. | Most slicing software starts with an [[.stl]] file and outputs the [[G-code]] file which contains the necessary instructions for the 3d printer. | ||
Examples of slicing software include [[Cura]] and [[ | Examples of slicing software include [[Cura]] and [[Slic3r]]. | ||
Latest revision as of 02:57, 29 September 2015
Slicing software takes a 3-dimensional model and "slices" it into an array of two dimensional layers. These layers are communicated to a 3d printer in order to tell the print head where to travel as it extrudes each layer of the print.
Most slicing software starts with an .stl file and outputs the G-code file which contains the necessary instructions for the 3d printer.