Bending Brake
Bending Brake
This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees. Maximum width is 50 inches.
| Required Badge | Required PPE | ||||
|---|---|---|---|---|---|
 |
 |
 |
 |
 |
|
Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.
This machine is covered under the Metal-1 training. Users who have not completed this training cannot use this machine.
Machine Info
This machine is a Jet, model BPB 1650.