Difference between revisions of "Asher Burkin"

From makerspace.tulane.edu
Jump to navigation Jump to search
(Water Jet)
(Projects)
Line 48: Line 48:
  
 
[[File:Titan 2.jpg|300px|]]
 
[[File:Titan 2.jpg|300px|]]
 +
 +
 +
 +
====Optics Lab====
 +
 +
[[File:Optics Lab in Mill.jpg|300px]]
 +
 +
 +
[[File:Optics Lab.jpg|300px|left]] [[File:Optics Lab 2.jpg|300px|Center]]
  
  

Revision as of 01:23, 24 November 2021

MakerSpace Fabrication Technician

Mill Work.jpg

Email: aburkin@tulane.edu

Major: Engineering Physics

Certificate: Mechanical Engineering

LinkedIn: in/asherburkin

Profile

Maker Skills

  • Digital 1.png
  • Digital 2.png
  • Metal 1.png
  • Metal 2.png
  • Electronics.png
  • Wood 1.png
  • CNC-Lathe.png
  • CNC-Mill.png
  • Water Jet2.png



Projects

CNC Mill

Titan 1 over time.jpg
Titans Mill 1.jpg

This is the second piece I milled from the Titans of CNC course.

Titan 2.jpg


Optics Lab

Optics Lab in Mill.jpg


Optics Lab.jpg

Center


Water Jet

I worked on a project to cut this 1 inch thick, cold rolled slab of steel, into a new base to hold a vice. The entire operation took around 45 minutes. The garnet container needed to be refilled over 10 times and I was constantly checking the orientation of the the water jet cutter. In setting up the program, I had to take into account the kerf of the water as the holes and size of the base needed to run true to the design. I ran a very slow cut for this operation to ensure the the deflection of the water, as it first goes through the steel, does not curve too much through the cut.

Cold rolled steel.jpg
Water jet cut for steel vice.jpg


Vice size comparison.jpg
Final cut.jpg