Difference between revisions of "Asher Burkin"

From makerspace.tulane.edu
Jump to navigation Jump to search
(The Rubtsov Lab Group (Optics Lab))
Line 51: Line 51:
====The Rubtsov Lab Group (Optics Lab)====
====The Rubtsov Group (Optics Lab)====
[[File:Optics Lab in Mill.jpg|300px]]
[[File:Optics Lab in Mill.jpg|300px]]

Revision as of 01:47, 24 November 2021

MakerSpace Fabrication Technician

Mill Work.jpg

Email: aburkin@tulane.edu

Major: Engineering Physics

Certificate: Mechanical Engineering

LinkedIn: in/asherburkin


Maker Skills

  • Digital 1.png
  • Digital 2.png
  • Metal 1.png
  • Metal 2.png
  • Electronics.png
  • Wood 1.png
  • CNC-Lathe.png
  • CNC-Mill.png
  • Water Jet2.png


CNC Mill

Titan 1 over time.jpg
Titans Mill 1.jpg

This is the second piece I milled from the Titans of CNC course.

Titan 2.jpg

The Rubtsov Group (Optics Lab)

Optics Lab in Mill.jpg

Optics Lab.jpg


CNC Lathe

The Ferris Lab (Ecology Lab)

Ecology Lab.jpg

Water Jet

I worked on a project to cut this 1 inch thick, cold rolled slab of steel, into a new base to hold a vice. The entire operation took around 45 minutes. The garnet container needed to be refilled over 10 times and I was constantly checking the orientation of the the water jet cutter. In setting up the program, I had to take into account the kerf of the water as the holes and size of the base needed to run true to the design. I ran a very slow cut for this operation to ensure the the deflection of the water, as it first goes through the steel, does not curve too much through the cut.

Cold rolled steel.jpg
Water jet cut for steel vice.jpg

Vice size comparison.jpg
Final cut.jpg