Asher Burkin

From makerspace.tulane.edu
Revision as of 01:46, 24 November 2021 by Aburkin (talk | contribs) (→‎Projects)
Jump to navigation Jump to search

MakerSpace Fabrication Technician

Email: aburkin@tulane.edu

Major: Engineering Physics

Certificate: Mechanical Engineering

LinkedIn: in/asherburkin

Profile

Maker Skills



Projects

CNC Mill

This is the second piece I milled from the Titans of CNC course.


The Rubtsov Lab Group (Optics Lab)


Center

CNC Lathe

The Ferris Lab (Ecology Lab)

Water Jet

I worked on a project to cut this 1 inch thick, cold rolled slab of steel, into a new base to hold a vice. The entire operation took around 45 minutes. The garnet container needed to be refilled over 10 times and I was constantly checking the orientation of the the water jet cutter. In setting up the program, I had to take into account the kerf of the water as the holes and size of the base needed to run true to the design. I ran a very slow cut for this operation to ensure the the deflection of the water, as it first goes through the steel, does not curve too much through the cut.