Available Tools: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
 
(37 intermediate revisions by 5 users not shown)
Line 1: Line 1:
==Available Equipment==
==Training==
 
Preventing injury to people (and equipment) is our first priority.  To do this, users must demonstrate knowledge and competence.  After completing Basic Training, users can earn [[Badge]]s that certify their competence.  The various badges, and the equipment authorized by that badge, are described in the [[Safety and Manuals]] section. 
 
Each machine also has an associated Job Hazard Analysis document which describes potential sources of injury for that specific machine.  To access these forms, go to [[Job Hazard Analysis (JHA) Documents]].
 
Many of the machines in the MakerSpace are "locked-out" from users until they complete the requisite training.  As training is completed, users will gain access to the machines through the [[Machine Access System]].
 
Most importantly, '''do not ever try to use a machine that has been "tagged-out" with a DANGER notice or whose power outlet has been locked'''.  If a machine seems to be behaving abnormally, immediately contact a Maker Fab Tech and describe the problem to them.
 
==Tools and Equipment==


===[[Machine Access System]]===
===[[Machine Access System]]===


===Stationary Powered Tools===
===Rapid Prototyping Tools===
*[[Scanning]]
*[[3D Printing]]
*[[Laser Cutting]]
*[[Vinyl Cutting]]
*[[CNC Routing/Milling]]
*[[Electronics]]
 
===Stationary Power Tools===


*[[Tormach CNC Milling Machine]]
*[[Tormach CNC Milling Machine]]
*[[Grinders m]]
*[[Tormach CNC Lathe]]
*[[Shear m]]
*[https://www.dropbox.com/sh/pbm9ectui21ofio/AABxB9a8U42rLXSio4YuDjK8a?dl=0 Lathe and Mill Tool Libraries]
*[[Bending Brake m]]
*[[Grinders]]
*[[Cut-Off Saw m]]
*[[Shear]]
 
*[[Bending Brake]]
*[[Cut-Off Saw]]
*[[Cold Saw]]
*[[Bandsaw]]
*[[Bandsaw]]
*[[Drill Press]]
*[[Drill Press]]
Line 17: Line 37:
*[[Table Mounted Saws]]
*[[Table Mounted Saws]]
*[[Router]]
*[[Router]]
*[[Lathe]]
*[[Glass Bead Abrasive Blast Cabinet]]


===Hand Held Power Tools===
===Hand Held Power Tools===
Line 28: Line 48:
*[[Buffers and Polishers]]
*[[Buffers and Polishers]]


===Surface Finishing===
===[[Hand Tools|Assorted Hand Tools]]===
*[[Glass Bead Abrasive Blast Cabinet]]
 
===[[Testing and Measurement]]===
 
===Finishing Tools===


<!---
===Welding===
===Welding===
Welding facilities are housed in the sculpture studio of the Woldenberg Art Center on the Newcomb campus.  The sculpture studio is in the beautiful 1920’s era natatorium that once housed the women’s swimming pool and is now the foundry and fabrication space.  The expansive and day-lit studio was fitted with a new 2 ton bridge crane, storage, lighting, ventilation and foundry facilities as well as the complete range of equipment for gas and arc welding, forging and other metal forming and fabrication processes.  
Welding facilities are housed in the sculpture studio of the Woldenberg Art Center on the Newcomb campus.  The sculpture studio is in the beautiful 1920’s era natatorium that once housed the women’s swimming pool and is now the foundry and fabrication space.  The expansive and day-lit studio was fitted with a new 2 ton bridge crane, storage, lighting, ventilation and foundry facilities as well as the complete range of equipment for gas and arc welding, forging and other metal forming and fabrication processes.  


Students who need help with ferrous or aluminum welding should contact Professor Dan Alley [mailto:dalley1@tulane.edu dalley1@tulane.edu]
Students who need help with ferrous or aluminum welding should contact Professor Dan Alley [mailto:dalley1@tulane.edu dalley1@tulane.edu]
 
--->
==Training==
 
For information on safety and [[PPE]] requirements for each machine in the MakerSpace, see the [[Job Hazard Analysis]] forms.
 
Preventing injury to people (and equipment) is our first priority.  To do this, users must demonstrate knowledge and competence.  Users can earn a "badge" that certifies their competence.  The various badges, and the equipment authorized by that badge, can be found here: [[PPE]]  For each badge, a user builds one or more "widgets" using a combination of hand and power tools. 
 
 
===Basic Training===
Every MakerSpace user (defined as anyone who touches any tool or piece of equipment) must complete the Basic Training online course, and sign the waiver form (available from any Ninja).  All users must go through additional training procedures in order to earn a badge that conveys access to  power tools.
https://tulane.learnerhall.com/Tulane/LearnerWeb_PTM.asp?ActionID=Launch&CourseID=TMS101CBT
 
===Digital-1 Badge===
Completion of the requirements for the Digital-1 badge allows access to the laser cutters and filament 3D printers.
(in progress)
 
===Digital-2 Badge===
This badge extends privileges to the Ember SLA 3D printers.
 
===Metal-1===
Users with the Metal-1 badge on their RFID card are allowed to use the drill press, band saw, grinding wheel, shear, and bending brake.  To earn Metal-1, these widgets must be correctly fabricated as shown on these plans: [http://makerspace.tulane.edu/index.php/File:Widget_for_Metal_1_badge.pdf Metal-1 Widget]
 
===Wood-1===
This badge gives access to the disc, belt, and spindle sanders; and the wood shop's drill press and band saws.
 
===Wood-2===
This badge extends Wood-1 privileges to the table saw and radial arm saw.

Latest revision as of 17:59, 5 April 2022

Training

Preventing injury to people (and equipment) is our first priority. To do this, users must demonstrate knowledge and competence. After completing Basic Training, users can earn Badges that certify their competence. The various badges, and the equipment authorized by that badge, are described in the Safety and Manuals section.

Each machine also has an associated Job Hazard Analysis document which describes potential sources of injury for that specific machine. To access these forms, go to Job Hazard Analysis (JHA) Documents.

Many of the machines in the MakerSpace are "locked-out" from users until they complete the requisite training. As training is completed, users will gain access to the machines through the Machine Access System.

Most importantly, do not ever try to use a machine that has been "tagged-out" with a DANGER notice or whose power outlet has been locked. If a machine seems to be behaving abnormally, immediately contact a Maker Fab Tech and describe the problem to them.

Tools and Equipment

Machine Access System

Rapid Prototyping Tools

Stationary Power Tools

Hand Held Power Tools

Assorted Hand Tools

Testing and Measurement

Finishing Tools