Available Tools: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
 
(109 intermediate revisions by 5 users not shown)
Line 1: Line 1:
==Available Equipment==
==Training==
 
Preventing injury to people (and equipment) is our first priority.  To do this, users must demonstrate knowledge and competence.  After completing Basic Training, users can earn [[Badge]]s that certify their competence.  The various badges, and the equipment authorized by that badge, are described in the [[Safety and Manuals]] section. 
 
Each machine also has an associated Job Hazard Analysis document which describes potential sources of injury for that specific machine.  To access these forms, go to [[Job Hazard Analysis (JHA) Documents]].
 
Many of the machines in the MakerSpace are "locked-out" from users until they complete the requisite training.  As training is completed, users will gain access to the machines through the [[Machine Access System]].
 
Most importantly, '''do not ever try to use a machine that has been "tagged-out" with a DANGER notice or whose power outlet has been locked'''.  If a machine seems to be behaving abnormally, immediately contact a Maker Fab Tech and describe the problem to them.
 
==Tools and Equipment==


===[[Machine Access System]]===
===[[Machine Access System]]===


===Stationery Metal and Plastic Working===
===Rapid Prototyping Tools===
*[[Scanning]]
*[[3D Printing]]
*[[Laser Cutting]]
*[[Vinyl Cutting]]
*[[CNC Routing/Milling]]
*[[Electronics]]
 
===Stationary Power Tools===


*[[Tormach CNC Milling Machine]]
*[[Tormach CNC Milling Machine]]
*[[Bandsaws]]
*[[Tormach CNC Lathe]]
*[[Drill Presses]]
*[https://www.dropbox.com/sh/pbm9ectui21ofio/AABxB9a8U42rLXSio4YuDjK8a?dl=0 Lathe and Mill Tool Libraries]
*[[Vertical Mills]]
*[[Lathe]]
*[[Grinders]]
*[[Grinders]]
*[[Shear]]
*[[Shear]]
*[[Bending Brake]]
*[[Bending Brake]]
*[[Cut-Off Saw]]
*[[Cut-Off Saw]]
 
*[[Cold Saw]]
===Stationery Wood Working===
*[[Bandsaw]]
*[[Bandsaw]]
*[[Drill Press]]
*[[Drill Press]]
Line 22: Line 37:
*[[Table Mounted Saws]]
*[[Table Mounted Saws]]
*[[Router]]
*[[Router]]
*[[Lathe]]
*[[Glass Bead Abrasive Blast Cabinet]]


===Hand Held Power Tools===
===Hand Held Power Tools===
*[[Portable Drills]]
*[[Portable Drills]]
*[[Saber Saw]]
*[[Portable Jig (Saber) Saw]]
*[[Circular Skil Saws]]
*[[Circular Skil Saws]]
*[[Reciprocating Sawzall Saws]]
*[[Reciprocating Sawzall Saws]]
*[[Hand Held Grinder and Cutoff Wheel]]
*[[Hand Held Angle Grinder and Cutoff Wheel]]
*[[Hand Held Belt Sander]]
*[[Hand Held Belt Sander]]
*[[Buffers and Polishers]]
*[[Buffers and Polishers]]


===Surface Finishing===
===[[Hand Tools|Assorted Hand Tools]]===
*[[Glass Bead Abrasive Blast Cabinet]]
 
===[[Testing and Measurement]]===
 
===Finishing Tools===


<!---
===Welding===
===Welding===
Welding facilities are housed in the sculpture studio of the Woldenberg Art Center on the Newcomb campus.  The sculpture studio is in the beautiful 1920’s era natatorium that once housed the women’s swimming pool and is now the foundry and fabrication space.  The expansive and day-lit studio was fitted with a new 2 ton bridge crane, storage, lighting, ventilation and foundry facilities as well as the complete range of equipment for gas and arc welding, forging and other metal forming and fabrication processes.  
Welding facilities are housed in the sculpture studio of the Woldenberg Art Center on the Newcomb campus.  The sculpture studio is in the beautiful 1920’s era natatorium that once housed the women’s swimming pool and is now the foundry and fabrication space.  The expansive and day-lit studio was fitted with a new 2 ton bridge crane, storage, lighting, ventilation and foundry facilities as well as the complete range of equipment for gas and arc welding, forging and other metal forming and fabrication processes.  


Students who need help with ferrous or aluminum welding should contact Professor Dan Alley [mailto:dalley1@tulane.edu dalley1@tulane.edu]
Students who need help with ferrous or aluminum welding should contact Professor Dan Alley [mailto:dalley1@tulane.edu dalley1@tulane.edu]
 
--->
==Training and Manuals==
 
All training materials are available through the [https://tulane.blackboard.com/webapps/portal/frameset.jsp MyTulane/Blackboard] system.  All users must go through the required training procedure in order to obtain access to the restricted machine tools.
 
Manuals for most of the tools in the MakerSpace have links below, and are also linked from specific sections of this Wiki.
 
'''[[File:Stationery_Saws.pdf]]'''
[[File:Model_87_BANDSAW_1986.pdf]]
[[File:Sears_18_band_saw_351-243981.pdf]]
[[File:Jet_Horizontal_band_saw_model_414458_manual.pdf]]
[[File:Milwaukee_14_inch_cutoff_saw_6176-20.pdf]]
'''[[File:Wood_Stationery_Saws.pdf]]'''
[[File:Jet_16_inch_band_saw_JWBS-16B.pdf]]
[[File:Powermatic_10_inch_Table_Saw_PM2000.pdf]]
[[File:POWERMATIC_ACCU-FENCE.pdf]]
[[File:Rockwell_RK7320_Blade_Runner_saw.pdf]]
[[File:Rockwell_RW9261_circile_cutter_for_Blade_Runner.pdf]]
 
[[File:Clausing_15_in_drill_press_model_1672.pdf]]
[[File:Sears_20_inch_drill_press_137-229200.pdf]]
[[File:Wilton_15_inch_drill_press_A5816.pdf]]
[[File:Delta_12_inch_disc_sander_31-120.pdf]]
[[File:Powermatic_Belt_Disc_sander_31A.pdf]]
[[File:Central_Machinery_8_inch_grinder_S-595.pdf]]
[[File:Eastwood_blast_cabinet_20027.pdf]]
[[File:Eastwood_dust_collector_30998.pdf]]
[[File:Central_Machinery_Mill_Drill_T2119.pdf]]
[[File:PX24_PX36.pdf]]
[[File:w1826_m.pdf]]
[[File:2HP,_1500CFM_DUST_COLLECTOR.pdf]]
[[File:STABIL-THERM_LAB_OVEN.pdf]]
[[File:Skil_6335_1-2_in_VSR_drill.pdf]]

Latest revision as of 17:59, 5 April 2022

Training

Preventing injury to people (and equipment) is our first priority. To do this, users must demonstrate knowledge and competence. After completing Basic Training, users can earn Badges that certify their competence. The various badges, and the equipment authorized by that badge, are described in the Safety and Manuals section.

Each machine also has an associated Job Hazard Analysis document which describes potential sources of injury for that specific machine. To access these forms, go to Job Hazard Analysis (JHA) Documents.

Many of the machines in the MakerSpace are "locked-out" from users until they complete the requisite training. As training is completed, users will gain access to the machines through the Machine Access System.

Most importantly, do not ever try to use a machine that has been "tagged-out" with a DANGER notice or whose power outlet has been locked. If a machine seems to be behaving abnormally, immediately contact a Maker Fab Tech and describe the problem to them.

Tools and Equipment

Machine Access System

Rapid Prototyping Tools

Stationary Power Tools

Hand Held Power Tools

Assorted Hand Tools

Testing and Measurement

Finishing Tools