Bandsaw

From makerspace.tulane.edu
Revision as of 16:41, 6 December 2016 by Cedric (talk | contribs) (Horizontal Bandsaw #1)
Jump to navigation Jump to search

Bandsaw #1

Bandsaw #1

This is an extremely large bandsaw which is normally used for cutting metal stock or sheets.

Machine Info

This machine is a model God-knows from approximately 300 years ago.

Replacement blades for this saw should be (who knows) and can be ordered from (Zeus himself?)

Bandsaw #2

Bandsaw #2

This bandsaw may be used for cutting smaller metal stock or plastic.

Machine Info

This machine is a Craftsman model XXXX. Manuals can be found XXXX, PPE instructions can be found XXXX.

Replacement blades for this saw should be XXXX and can be ordered from (Fastenal/McMaster?)

Bandsaw #3

Bandsaw #3

This is a large bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Small wood cuts should be made on Bandsaw #4, also located in the Wood Shop.

Machine Info

This machine is a Jet model XXXX. Manuals can be found XXXX, PPE instructions can be found XXXX.

Replacement blades for this saw should be XXXX and can be ordered from (Fastenal/McMaster?)

Bandsaw #4

Bandsaw #4

This is a small bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Larger wood cuts should be made on Bandsaw #3, also located in the Wood Shop.

Machine Info

This machine is a Crafstman model XXXX. Manuals can be found XXXX, PPE instructions can be found XXXX.

Replacement blades for this saw should be XXXX and can be ordered from (Fastenal/McMaster?)

Horizontal Bandsaw #1

Horizontal Bandsaw #1

This is a powerful bandsaw specifically used for cutting metal or plastic rods, tubes, and pipes. It is designed to automatically shut off when the cut is completed, and it has a clamp to hold the stock while it's cutting. Be sure to place a waste container under the chute that directs chips away from the cutting area. Stock up to 5" wide can be cut. The blade in the machine is optimized for metal and plastic. Do not use it to cut wood.

Machine Info

This machine is a Jet model 414458. The manuals can be found here Jet Horizontal Band Saw manual (.pdf) PPE instructions can be found XXXX.

Replacement blades for this saw should be 64.5" x 0.5" and can be ordered from Amazon. Recommended metal cutting blade is Bosch BS6412-24M