Cold Saw

From makerspace.tulane.edu
Revision as of 13:11, 6 February 2019 by Cedric (talk | contribs) (Created page with "400px|thumb|right|Cold Saw This "cold saw" may be used ONLY for cutting aluminum or brass. Cutting any other material is dangerous and will destroy the...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This "cold saw" may be used ONLY for cutting aluminum or brass. Cutting any other material is dangerous and will destroy the blade.

Required Badge Required PPE
Metal 2.png Safety Eye.png Safety Pants.png Safety Hair.png Safety Shoes.png Safety Jewelry.png

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Metal-2 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a Makita model 6176.

Replacement carbide-tipped blades this saw should be xx" diameter, xx" thick with a x" arbor, and can be ordered from Amazon.