Difference between revisions of "Digital-1 Training"

From makerspace.tulane.edu
Jump to navigation Jump to search
Line 13: Line 13:
 
Read through the presentation linked below and complete the quiz at the end.
 
Read through the presentation linked below and complete the quiz at the end.
  
'''[https://makerspace.tulane.edu/Uploads/Training/Digital-1/index.html Digital-1 Presentation]'''
+
'''[https://makerspace.tulane.edu/Uploads/Training/Digital-1v2/index.html Digital-1 Presentation]'''
  
 
===Step Two===
 
===Step Two===

Revision as of 20:38, 18 September 2019

Digital 1.png

This is the basic training for use of the simpler digital rapid prototyping tools. Completion of the Digital-1 training allows access to

Step One

Read through the presentation linked below and complete the quiz at the end.

Digital-1 Presentation

Step Two

Complete the following designs to demonstrate your ability to use the machines.

Backpack Tag

a) Laser cutter: Select a piece of thin plywood from the bin labelled "Digital 1," and design and make a backpack tag for that size piece of wood like the one in the picture. Use a vector graphics software package (Illustrator, Corel Draw, Inkscape) to lay out the tag and then use the laser cutter to fabricate it from a small piece of scrap plywood. The slot for the plastic loop should have inside dimensions of 5mm x 15mm. When your tag is complete, ask the Ninja for a plastic loop.