Difference between revisions of "Digital-2 Training"

From makerspace.tulane.edu
Jump to navigation Jump to search
(Step Two)
Line 15: Line 15:
 
===Step Two===
 
===Step Two===
 
Complete the following designs to demonstrate your ability to use the machines.
 
Complete the following designs to demonstrate your ability to use the machines.
 +
 +
'''a) AutoDesk Ember SLA Printer.''' Download and print the model linked below.  Remember to use support.
 +
 +
'''[ Ember SLA Model]'''
 +
 +
[[File:"Name_Tag_Inkscape.JPG"|right|thumb|200px|frame|Inkscape Istructions]]
 +
'''b) Carvey CNC Router.'''  Download the .svg file linked below.  Open the file and change the name to yours, then press "Shift-Ctrl-C" to change your text to a path.  Save the file and import it into Easel, then set the depths as shown in the image at right.  Cut out your name plate.
 +
 +
'''[https://tulane.box.com/s/83lobefp11yvm4dz8o45gsm0zq5gu379 Carvey Name Plate]'''

Revision as of 19:36, 4 September 2017

Digital 2.png

This is additional training for use of the more complex rapid prototyping tools. Completion of the Digital-2 training allows access to

Step One

Read through the presentation linked below and complete the quiz at the end.

Digital-2 Presentation

Step Two

Complete the following designs to demonstrate your ability to use the machines.

a) AutoDesk Ember SLA Printer. Download and print the model linked below. Remember to use support.

[ Ember SLA Model]

File:"Name Tag Inkscape.JPG"
Inkscape Istructions

b) Carvey CNC Router. Download the .svg file linked below. Open the file and change the name to yours, then press "Shift-Ctrl-C" to change your text to a path. Save the file and import it into Easel, then set the depths as shown in the image at right. Cut out your name plate.

Carvey Name Plate