Digital-2 Training

From makerspace.tulane.edu
Revision as of 19:36, 4 September 2017 by Tschule (talk | contribs) (Step Two)
Jump to navigation Jump to search
Digital 2.png

This is additional training for use of the more complex rapid prototyping tools. Completion of the Digital-2 training allows access to

Step One

Read through the presentation linked below and complete the quiz at the end.

Digital-2 Presentation

Step Two

Complete the following designs to demonstrate your ability to use the machines.

a) AutoDesk Ember SLA Printer. Download and print the model linked below. Remember to use support.

[ Ember SLA Model]

File:"Name Tag Inkscape.JPG"
Inkscape Istructions

b) Carvey CNC Router. Download the .svg file linked below. Open the file and change the name to yours, then press "Shift-Ctrl-C" to change your text to a path. Save the file and import it into Easel, then set the depths as shown in the image at right. Cut out your name plate.

Carvey Name Plate