Difference between revisions of "Grinders"

From makerspace.tulane.edu
Jump to navigation Jump to search
Line 1: Line 1:
 
==Grinder #1==
 
==Grinder #1==
[[File: Grinder_1.JPG|200px|thumb|right|Drill Press #1]]
+
[[File: Grinder_1.JPG|200px|thumb|right|Grinder #1]]
  
This drill press may be used for drilling metal or plastic, although its speed has been set for metal.
+
This grinder is currently configured for grinding ONLY ferrous material (steel and iron) on both sides.  Grinding any other material will clog the abrasive wheels.  
  
 
===Machine Info===
 
===Machine Info===
This machine is a Clausing model 1672.   
+
This machine is a Cincinnatti Electric model xxxx.   
 
 
Manuals can be found at  [http://makerspace.tulane.edu/index.php/File:Clausing_15_in_drill_press_model_1672.pdf Clausing drill press]
 
  
 
Click here [[PPE]] for training (badge) levels and requirements and Personal Protective Equipment.
 
Click here [[PPE]] for training (badge) levels and requirements and Personal Protective Equipment.
  
Replacement bits for this press should be XXXX and can be ordered from (Fastenal/McMaster?)
+
Replacement wheels for this grinder should be 8" in diameter.

Revision as of 20:59, 19 January 2017

Grinder #1

Grinder #1

This grinder is currently configured for grinding ONLY ferrous material (steel and iron) on both sides. Grinding any other material will clog the abrasive wheels.

Machine Info

This machine is a Cincinnatti Electric model xxxx.

Click here PPE for training (badge) levels and requirements and Personal Protective Equipment.

Replacement wheels for this grinder should be 8" in diameter.