Difference between revisions of "LulzBot TAZ 5 Print Configurations"

From makerspace.tulane.edu
Jump to navigation Jump to search
Line 5: Line 5:
 
[[File:TAZ_settings.jpg|LulzBot TAZ 5 Print Configurations]]
 
[[File:TAZ_settings.jpg|LulzBot TAZ 5 Print Configurations]]
  
[[https://www.lulzbot.com/support/taz-cura-profiles|Source]]
+
[[https://www.lulzbot.com/support/taz-cura-profiles Source page (LulzBot Support)]]

Revision as of 18:23, 8 October 2015

This page contains 3d printing configuration information specific to the LulzBot TAZ 5. For preparing any print for this printer, make sure that you select "Lulzbot Taz 5 (0.5 Nozzle)" under "Machine" in Cura. If that option is not present, you may need to follow the Cura configuration instructions for this printer, or may need to install the latest LulzBot version of Cura.

The recommended settings are below. Our printers are TAZ5 and the nozzle diameter is 0.50mm. These affect the recommended nozzle temperature, bed temperature, and slice thickness.

LulzBot TAZ 5 Print Configurations

[Source page (LulzBot Support)]