LulzBot TAZ 5 Print Configurations

Revision as of 01:43, 30 September 2015 by (talk | contribs)
Jump to navigation Jump to search

This page contains 3d printing configuration information specific to the LulzBot TAZ 5. For preparing any print for this printer, make sure that you select "Lulzbot Taz 5 (0.5 Nozzle)" under "Machine" in Cura. If that option is not present, you may need to follow the Cura configuration instructions for this printer, or may need to install the latest LulzBot version of Cura.


The stock preheat options availible on the printer work perfectly for PLA. No preparations need to be made to the PEI print bed for PLA to stick.