Radial Arm Saw: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
Line 15: Line 15:
Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the [[Safety and Manuals]] section.
Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the [[Safety and Manuals]] section.


This machine is covered under the '''Wood-1''' training.  Users who have not completed this training cannot use this machine.
This machine is covered under the '''Wood-2''' training.  Users who have not completed this training cannot use this machine.


===Machine Info===
===Machine Info===

Revision as of 21:13, 28 May 2017

For information on safety and PPE requirements for each machine in the MakerSpace, see the Job Hazard Analysis forms.

Radial Arm Saw

Radial Arm Saw

This powerful saw is to be used only under staff supervision (Prof. Walker, Prof. Schuler, Mr. Sullivan). Properly equipped, it can cut wood, plastic, and aluminum.

Required Badge Required PPE

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Wood-2 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a Delta model RS803. Manuals can be found [Delta Radial Arm Saw]

Replacement blades for this saw should be 10" diameter and can be ordered from Lowes or Home Depot.