Sanders: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==Combination Belt/Disk Sander==
==Combination Belt/Disk Sander==
[[File:Sander_1.JPG|200px|thumb|right|Combination Belt/Disk Sander]]
This sander may be used for sanding wood or plastic, although caution must be used when airborne particles could be health hazards.
This sander may be used for sanding wood or plastic, although caution must be used when airborne particles could be health hazards.


Line 20: Line 21:


==Spindle Sander==
==Spindle Sander==
[[File:Spindle_Sander.jpg|200px|thumb|right|Spindle Sander]]
This sander may be used for wood. It's best for stripping off the burned edges of inside profiles on laser-cut parts. Clamping the workpiece is not possible/recommended during use.  Be cautious about workpiece placement when starting the tool.
This sander may be used for wood. It's best for stripping off the burned edges of inside profiles on laser-cut parts. Clamping the workpiece is not possible/recommended during use.  Be cautious about workpiece placement when starting the tool.



Latest revision as of 17:34, 23 August 2017

Combination Belt/Disk Sander

Combination Belt/Disk Sander

This sander may be used for sanding wood or plastic, although caution must be used when airborne particles could be health hazards.

Required Badge Required PPE

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Wood-1 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a Powermatic 31A Belt/Disc sander.

Replacement paper for this sander should be XXXX and can be ordered from Amazon, Woodcraft, et. al.

Spindle Sander

Spindle Sander

This sander may be used for wood. It's best for stripping off the burned edges of inside profiles on laser-cut parts. Clamping the workpiece is not possible/recommended during use. Be cautious about workpiece placement when starting the tool.

Required Badge Required PPE

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Wood-1 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a WEN model XXXX.

Replacement sanding sleeves for this tool can be ordered from Amazon, Home Depot, Lowe's, et. al.