Sanders

From makerspace.tulane.edu
Revision as of 21:11, 28 May 2017 by Tschule (talk | contribs)
Jump to navigation Jump to search

Sander #1

This combination Disc and Belt Sander may be used for sanding wood or plastic, although caution must be used when airborne particles could be health hazards.

Required Badge Required PPE
Wood 1.png Safety Eye.png Safety Pants.png Safety Hair.png Safety Shoes.png Safety Jewelry.png

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Wood-1 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a Powermatic 31A Belt/Disc sander.

Replacement paper for this sander should be XXXX and can be ordered from Amazon, Woodcraft, et. al.

Sander #2

This sander may be used for wood. It's best for stripping off the burned edges of inside profiles on laser-cut parts. Clamping the workpiece is not possible/recommended during use. Be cautious about workpiece placement when starting the tool.

Required Badge Required PPE
Wood 1.png Safety Eye.png Safety Pants.png Safety Hair.png Safety Shoes.png Safety Jewelry.png

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Wood-1 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a WEN model XXXX.

Replacement sanding sleeves for this tool can be ordered from Amazon, Home Depot, Lowe's, et. al.