Scot Ackerman MakerSpace at Tulane University Wiki
Mardi Gras Schedule: Open normally Wednesday 2/14.
A MakerSpace has been described as new amalgam of art, craft, and technology. Our goal is to serve all makers, and potential makers, in the Tulane Community. We do so by providing tools, assistance, and ideas. Commercial use of the MakerSpace is not allowed. If in doubt, questions about interpretation should be directed to the Director before a project is started.
Where are we?
When are we open?
Click on "MakerSpace Access" to see our hours of operation.
News and Updates
- Tulane has been chosen as one of 12 schools participating in the Make48 College Challenge. Our competitors include Rice, the University of Illinois, and Georgetown. Participants in the 3-4 person team must be undergraduates or May '18 grads, and we're looking for a diverse group of team members.
- We have yet another new 3D printer. This one's a Monoprice IIIP Mini Delta. For $160, the print quality is quite good. It uses a special version of Cura, available on the computer next to the Carvey. Here's the manual
- Our new 3D printer, a Prusa MK3 has arrived and it's set up to run. Instead of Cura, use PrusaControl on the PC next to the Carvey. Build volume is z=9.84" x=8.3" y=8.3" and the manual is here
- The MakerSpace is featured in the launch for Tulane's $1.3B fund raising campaign. Chase Schober, one of our Ninjas, is seen in the video and the web site mentions the NASA team in the MakerSpace.
- A new video, featuring Maker Ninja Antonius Prader, was produced by the Office of Admission. Shout-out to Justin Baris for organizing this.
- We have purchased a Carvey and a Formlabs SLA printer. Both are available to users with Digital-2_Training credentials.
- A 30-second video, featuring the NASA team, was filmed in the MakerSpace.
- We have started a Slack channel for the Tulane MakerSpace to post micro-updates and discussions. You can join by clicking here or the button at the right of the page.
- The Tulane MakerSpace was recently featured as part of a tour for the Board of Tulane. The tour was well-received and many board members enjoyed discussing projects and tools with Chase Schober and Olivia Michael.
- We have upgraded our 3d printing equipment and filaments, and can now report that (almost) all of our 3d printers are reliably creating beautiful prints and we haven't had a failed print in well over a month of heavy use.
- The 2017 Maker of the Year Awards were announced on April 18. The winners of cash prizes are Chase Schober and Rae Mills. Scroll down to see their winning submissions.
- On April 12, 2017 Tulane's PR Office sent out a press release featuring a photo of Cody O'Cain's 3-d cosine map
- The March '17 TULANIAN magazine features the MakerSpace on pages 5, 7, and 11 of the print edition (pages 7, 9, and 13 in the electronic version).
- MakerSpace Digital Library is now available in the mezzanine area of the MakerSpace.
- The Hullabaloo (2/9/2017) reports on the MakerSpace as a place for collaboration
- Please watch our new (1/24/2017) video, featuring Maker Ninjas Afsheen, Ben, and Elise.
- And while you have a YouTube window open, check out the video of Tulane University's 2016/17 grand prize winning team submission to NASA's BIG Idea Challenge MakerSpace users designed and built a scale prototype for a modular spacecraft intended to ferry cargo spacecraft from Low Earth Orbit (LEO) To Lunar-Distant Retrograde Orbit (LDRO). MakerSpace Advisor Prof. Schuler was the team's mentor.
Maker of the Year
The 2017 Maker of the Year Award, funded by a generous gift from Lary Walker (G ’76, ’79) are Chase Schober (Engineering Physics) and Rae Mills (Computer Science and Studio Art).
Architecture Laser Cutter
The School of Architecture's large format laser cutters are available to MakerSpace users. Currently they charge $10/hour ($3 minimum) for machine time; payable with Splash card or check. They have extended operating hours. Go to http://architecture.tulane.edu/dol/reserve-laser to schedule time on one of their three 36"x18" laser cutters. File formats are PDF or Illustrator. As with our Epilog laser cutters, use a line width of 0.001" to vector cut. Be sure to set your document size to their bed size of 36"x18" which is different from the bed size of the Epilogs. Bring your material and files (on a USB drive) to room 104 of Richardson Memorial Hall; student workers are there to help you get set up.
Links on this Wiki
- Hours, location, and contact information.
- Policy on fabrication projects for Tulane clients
- Links and information concerning the tools we have in the MakerSpace, grouped by category.
- Information on safety procedures and training, plus links to instruction manuals for equipment.
- A list of software programs that are available to students, with notes on their use.
- Supplies on hand at the MakerSpace, and where to find them.
- Information about suppliers and other online resources.
- Samples of projects and instructions for doing them yourself.
- Access the digital library for MakerSpace books and resources
- Examples of projects built in the Tulane MakerSpace.
- Information on those involved in building, managing, and improving the Tulane MakerSpace.
- Connect with the Tulane Makers and Robotics Society.
- Methods for supporting the Tulane MakerSpace
The New Orleans Maker Community
New Orleans has a long history of artistic creation, and that creativity is now expressed in a vibrant maker community. The Tulane MakerSpace is proud to be a part of this community. Other members include
- FabLab NOLA, at Delgado Community College, open to the community
- Entrescan, professional advanced manufacturing services.
- Realized Designs, professional design and production studio
- Makers of N.O., local Makers group
- The New Orleans Mini Maker Faire
- The Mystic Krewe of the Silver Ball