Difference between revisions of "Slicing software"

From makerspace.tulane.edu
Jump to navigation Jump to search
 
Line 3: Line 3:
 
Most slicing software starts with an [[.stl]] file and outputs the [[G-code]] file which contains the necessary instructions for the 3d printer.
 
Most slicing software starts with an [[.stl]] file and outputs the [[G-code]] file which contains the necessary instructions for the 3d printer.
  
Examples of slicing software include [[Cura]] and [[Slicer]].
+
Examples of slicing software include [[Cura]] and [[Slic3r]].

Latest revision as of 02:57, 29 September 2015

Slicing software takes a 3-dimensional model and "slices" it into an array of two dimensional layers. These layers are communicated to a 3d printer in order to tell the print head where to travel as it extrudes each layer of the print.

Most slicing software starts with an .stl file and outputs the G-code file which contains the necessary instructions for the 3d printer.

Examples of slicing software include Cura and Slic3r.