Difference between revisions of "Tormach CNC Milling Machine"

From makerspace.tulane.edu
Jump to navigation Jump to search
Line 14: Line 14:
 
#When facing with a superfly on aluminum, use 2500 RPM, 12 ipm
 
#When facing with a superfly on aluminum, use 2500 RPM, 12 ipm
 
#When facing with a 1/2" on aluminum, use 5000 RPM, 12 IPM
 
#When facing with a 1/2" on aluminum, use 5000 RPM, 12 IPM
 +
#If you have a tall, thin piece of stock, stabilize it on either side with 1-2-3 blocks

Revision as of 20:42, 9 June 2017

Required Badge Required PPE
CNC.png Safety Eye.png Safety Pants.png Safety Hair.png Safety Shoes.png Safety Jewelry.png

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the CNC training. Users who have not completed this training cannot use this machine.

CNC:

  1. When facing with a superfly on aluminum, use 2500 RPM, 12 ipm
  2. When facing with a 1/2" on aluminum, use 5000 RPM, 12 IPM
  3. If you have a tall, thin piece of stock, stabilize it on either side with 1-2-3 blocks