Workshops

From makerspace.tulane.edu
Revision as of 01:47, 1 April 2019 by Cedric (talk | contribs)
Jump to navigation Jump to search
Instructors Ian Pimenta and Robert Johnson with Physics Professor Jessica Graber, after Inkscape I workshop. photo credit: Prof. Katherine Raymond

In Fall 2019 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the new MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the handouts.

Date/Time Topic Instructors
Fall 2019 date TBA -- Inkscape I for beginners -- instructors TBA
Fall 2019 date TBA -- Inkscape II for intermediate users -- instructors TBA
Fall 2019 date TBA -- Fusion360 I Introduction for beginners -- instructors TBA
Fall 2019 date TBA -- Fusion360 II More features -- instructors TBA
Fall 2019 date TBA -- Meshmixer for editing STL files -- instructors TBA
Fall 2019 date TBA -- CAD on the Carvey (requires Fusion360 I) -- instructors TBA


Handouts used in these seminars


Inkscape I for Beginners


Inkscape II for intermediate users


Fusion360 I Introduction to 3D printing


Fusion360 II More features


File:Put a filename here CAD on the Carvey


File:Put a filename here Meshmixer for editing STL files