Workshops

From makerspace.tulane.edu
Revision as of 13:55, 16 September 2019 by Cedric (talk | contribs)
Jump to navigation Jump to search
Instructors Ian Pimenta and Robert Johnson with Physics Professor Jessica Graber, after Inkscape I workshop. photo credit: Prof. Katherine Raymond

In Fall 2019 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the new MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the handouts.

Date/Time Topic Instructors
Fall 2019 date TBA -- Inkscape I for beginners -- Robert, Ian
Fall 2019 date TBA -- Inkscape II for intermediate users -- Robert, Ian
9/28/19 9:30AM -- Fusion360 I Introduction for beginners -- Elena and Kyra Pre-req: download software onto your laptop and bring it to class
10/26/19 9:30AM -- Fusion360 I Introduction for beginners -- Elena and Kyra
Fall 2019 date TBA -- Fusion360 II More features -- instructors TBA
Fall 2019 date TBA -- Meshmixer for editing STL files -- instructors TBA
Fall 2019 date TBA -- CAD on the Carvey (requires Fusion360 I) -- instructors TBA

Fusion360 Introduction (enrollment limit = 12): Elena and Kyra, instructors - pre-req is to download Fusion360 onto your laptop and bring it with you Sat September 28 Sat October 26

Inkscape 2 (enrollment limit = 12): Robert and Ian, instructors - pre-req is some experience in using Inkscape, plus BYO laptop with Inkscape loaded. Sat October 5 Sun November 3

Water jet cutter (hands-on, enrollment limit = 4): Dylan and Robert, instructors - extensive pre-req at http://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training Sat October 19 Sat November 9




Handouts used in these seminars


Inkscape I for Beginners


Inkscape II for intermediate users


Fusion360 I Introduction to 3D printing


Fusion360 II More features


File:Put a filename here CAD on the Carvey


File:Put a filename here Meshmixer for editing STL files