Workshops

From makerspace.tulane.edu
Revision as of 21:44, 25 September 2019 by Cedric (talk | contribs)
Jump to navigation Jump to search
Instructors Ian Pimenta and Robert Johnson with Physics Professor Jessica Graber, after Inkscape I workshop. photo credit: Prof. Katherine Raymond

In Fall 2019 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the Inkscape and Fusion handouts.

Date/Time Topic Instructors Pre-requisites
9/28/19 9:30AM Fusion360 I Introduction for beginners Elena, Kyra Install Fusion360 software on your laptop and bring it to class
10/5/19 9:30AM Inkscape II for intermediate users Robert, Ian Some experience designing with Inkscape. Bring laptop with Inkscape installed.
10/19/19 9:30AM Water Jet Cutter Dylan, Robert must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand
10/26/19 9:30AM Fusion360 I Introduction for beginners Elena, Kyra Install Fusion360 software on your laptop and bring it to class
11/3/19 9:30AM Inkscape II for intermediate users Robert, Ian Some experience designing with Inkscape. Bring laptop with Inkscape installed.
11/9/19 9:30AM Water Jet Cutter Dylan, Robert must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand
Spring 2020 CAD on the Carvey (requires Fusion360 I) instructors TBA
Spring 2020 Inkscape I for beginners Robert, Ian
Spring 2020 Fusion360 II More features instructors TBA


Handouts used in these seminars


MARS LaserWorkshop.pdf Inkscape I for Beginners


AdvancedLaserCutting Tree V2.pdf Inkscape II for intermediate users


Fusion Basics 02202019.pdf Fusion360 I Introduction to 3D printing


Fusion 360 Guide 4-11-18.pdf Fusion360 II More features


File:Put a filename here CAD on the Carvey


File:Put a filename here Meshmixer for editing STL files