Difference between revisions of "Ultimaker 2 Print Configurations"

From makerspace.tulane.edu
Jump to navigation Jump to search
(Created page with "PLA: <br /> ABS: because of contraction due to cooling, ABS tends to lift away from the glass build plate. This is worse for square corners; round objects rarely lift. In Cu...")
 
Line 1: Line 1:
PLA:
+
This page contains [[3d printing]] configuration information specific to the [[Ultimaker 2]]. For preparing any print for this printer, make sure that you select "Ultimaker2" under "Machine" in [[Cura]]. If that option is not present, you may need to follow the [[Ultimaker 2#Cura Configuration|Cura configuration instructions]] for this printer, or may need to install the latest LulzBot version of [[Cura]].
<br />
+
 
ABS: because of contraction due to cooling, ABS tends to lift away from the glass build plate.  This is worse for square corners; round objects rarely lift.  In Cura, specify a ''raft'' around your object.  This way, the raft will (possibly) lift but your object may stay flat.  When the build-plate is still cool, paint a thin layer of ABS paint (glass jar) onto the clean glass build plate.  The dried ABS paint will further anchor your object to the build plate.  Recommended settings are ......
+
==PLA==
<br />
+
 
HIPS:
+
==ABS==
 +
Because of contraction due to cooling, ABS tends to lift away from the glass build plate.  This is worse for square corners; round objects rarely lift.  In Cura, specify a ''raft'' around your object.  This way, the raft will (possibly) lift but your object may stay flat.  When the build-plate is still cool, paint a thin layer of ABS paint (glass jar) onto the clean glass build plate.  The dried ABS paint will further anchor your object to the build plate.  Recommended settings are ......
 +
 
 +
==HIPS==

Revision as of 14:11, 29 September 2015

This page contains 3d printing configuration information specific to the Ultimaker 2. For preparing any print for this printer, make sure that you select "Ultimaker2" under "Machine" in Cura. If that option is not present, you may need to follow the Cura configuration instructions for this printer, or may need to install the latest LulzBot version of Cura.

PLA

ABS

Because of contraction due to cooling, ABS tends to lift away from the glass build plate. This is worse for square corners; round objects rarely lift. In Cura, specify a raft around your object. This way, the raft will (possibly) lift but your object may stay flat. When the build-plate is still cool, paint a thin layer of ABS paint (glass jar) onto the clean glass build plate. The dried ABS paint will further anchor your object to the build plate. Recommended settings are ......

HIPS