3D Printing: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:


The standard slicing software favored for these printers is [[Cura]], which allows you to arrange and size your model and set options for the printer to follow.  The LulzBot version of Cura is recommended, as it contains more features, and works with both the TAZ 5's and the Ultimaker 2: https://www.lulzbot.com/cura
The standard slicing software favored for these printers is [[Cura]], which allows you to arrange and size your model and set options for the printer to follow.  The LulzBot version of Cura is recommended, as it contains more features, and works with both the TAZ 5's and the Ultimaker 2: https://www.lulzbot.com/cura
== Available 3D Printers ==
[[Ultimaker 2]]
<br/>
[[Hexagon Extruder TAZ 5]]
<br/>
[[FlexyDually Extruder TAZ 5]]


== Recommended Print Settings ==
== Recommended Print Settings ==
[[Ultimaker 2 Print Settings]]
[[Ultimaker 2 Print Settings]]
<br/>
[[Hexagon Extruder TAZ 5 Print Settings]]
<br/>
<br/>
[[FlexyDually Extruder TAZ 5 Print Settings]]
[[FlexyDually Extruder TAZ 5 Print Settings]]
<br/>
[[Hexagon Extruder TAZ 5 Print Settings]]


== Recommended settings - Dual Extruder Taz ==
== Recommended settings - Dual Extruder Taz ==

Revision as of 02:10, 29 September 2015

The Tulane MakerSpace contains Ultimaker 2 and LulzBot TAZ 5 3d printers with heated beds to allow for both ABS and PLA printer filament. ABS filament allows for better finishing effects (such as smoothing), but PLA provides a more rigid part and has has much better adherence to the print bed. There are other advantages and disadvantages to both. Cost is the same (currently ~$18 per kg).

The standard slicing software favored for these printers is Cura, which allows you to arrange and size your model and set options for the printer to follow. The LulzBot version of Cura is recommended, as it contains more features, and works with both the TAZ 5's and the Ultimaker 2: https://www.lulzbot.com/cura

Available 3D Printers

Ultimaker 2
Hexagon Extruder TAZ 5
FlexyDually Extruder TAZ 5

Recommended Print Settings

Ultimaker 2 Print Settings
Hexagon Extruder TAZ 5 Print Settings
FlexyDually Extruder TAZ 5 Print Settings

Recommended settings - Dual Extruder Taz

PLA: 9/28/2015 settings of .... with 3mm PLA and 3mm PVA worked well
ABS:
HIPS:

Recommended settings - Single Extruder Taz

PLA:
ABS:
HIPS:

Recommended settings - Ultimaker 2

PLA:
ABS: because of contraction due to cooling, ABS tends to lift away from the glass build plate. This is worse for square corners; round objects rarely lift. In Cura, specify a raft around your object. This way, the raft will (possibly) lift but your object may stay flat. When the build-plate is still cool, paint a thin layer of ABS paint (glass jar) onto the clean glass build plate. The dried ABS paint will further anchor your object to the build plate. Recommended settings are ......
HIPS: