Difference between revisions of "Available Tools"

From makerspace.tulane.edu
Jump to navigation Jump to search
(Stationary Powered Tools)
Line 1: Line 1:
 
==Training==
 
==Training==
  
Preventing injury to people (and equipment) is our first priority.  To do this, users must demonstrate knowledge and competence.  After completing Basic Training, users can earn "badges" that certify their competence.  The various badges, and the equipment authorized by that badge, is listed below. For each badge, a user builds one or more "widgets" using a combination of tools.  
+
Preventing injury to people (and equipment) is our first priority.  To do this, users must demonstrate knowledge and competence.  After completing Basic Training, users can earn "badges" that certify their competence.  The various badges, and the equipment authorized by that badge, are described in the [[Safety and Manuals]] section. 
 +
 
 +
Each machine also has an associated Job Hazard Analysis document which describes potential sources of injury for that specific machine.  To access these forms, go to [[Job Hazard Analysis (JHA) Documents]].
 +
 
 +
Many of the machines in the MakerSpace are "locked-out" from users until they complete the requisite training.  As training is completed, users will gain access to the machines through the [[Machine Access System]].
 +
 
 +
Most importantly, '''do not ever try to use a machine that has been "tagged-out" with a DANGER notice or whose power outlet has been locked'''.  If a machine seems to be behaving abnormally, immediately contact a Maker Ninja and describe the problem to them.
  
For information on safety and training requirements for each machine in the MakerSpace, see [[Safety and Manuals]].
 
  
 
==Tools and Equipment==
 
==Tools and Equipment==

Revision as of 00:38, 19 August 2017

Training

Preventing injury to people (and equipment) is our first priority. To do this, users must demonstrate knowledge and competence. After completing Basic Training, users can earn "badges" that certify their competence. The various badges, and the equipment authorized by that badge, are described in the Safety and Manuals section.

Each machine also has an associated Job Hazard Analysis document which describes potential sources of injury for that specific machine. To access these forms, go to Job Hazard Analysis (JHA) Documents.

Many of the machines in the MakerSpace are "locked-out" from users until they complete the requisite training. As training is completed, users will gain access to the machines through the Machine Access System.

Most importantly, do not ever try to use a machine that has been "tagged-out" with a DANGER notice or whose power outlet has been locked. If a machine seems to be behaving abnormally, immediately contact a Maker Ninja and describe the problem to them.


Tools and Equipment

Machine Access System

Stationary Powered Tools

Hand Held Power Tools

Surface Finishing

Welding

Welding facilities are housed in the sculpture studio of the Woldenberg Art Center on the Newcomb campus. The sculpture studio is in the beautiful 1920’s era natatorium that once housed the women’s swimming pool and is now the foundry and fabrication space. The expansive and day-lit studio was fitted with a new 2 ton bridge crane, storage, lighting, ventilation and foundry facilities as well as the complete range of equipment for gas and arc welding, forging and other metal forming and fabrication processes.

Students who need help with ferrous or aluminum welding should contact Professor Dan Alley dalley1@tulane.edu