Bandsaw

From makerspace.tulane.edu
Revision as of 01:45, 27 November 2016 by Tschule (talk | contribs)
Jump to navigation Jump to search

Bandsaw #1

Bandsaw #1

This is an extremely large bandsaw which is normally used for cutting metal stock or sheets.

Machine Info

This machine is a model God-knows from approximately 300 years ago.

Replacement blades for this saw should be (who knows) and can be ordered from (Zeus himself?)

Bandsaw #2

Bandsaw #2

This bandsaw may be used for cutting smaller metal stock or plastic.

Machine Info

This machine is a Craftsman model XXXX. Manuals can be found XXXX, PPE instructions can be found XXXX.

Replacement blades for this saw should be XXXX and can be ordered from (Fastenal/McMaster?)

Bandsaw #3

Bandsaw #3

This is a large bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Small wood cuts should be made on Bandsaw #4, also located in the Wood Shop.

Machine Info

This machine is a Jet model XXXX. Manuals can be found XXXX, PPE instructions can be found XXXX.

Replacement blades for this saw should be XXXX and can be ordered from (Fastenal/McMaster?)

Bandsaw #4

Bandsaw #4

This is a small bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Larger wood cuts should be made on Bandsaw #3, also located in the Wood Shop.

Machine Info

This machine is a Crafstman model XXXX. Manuals can be found XXXX, PPE instructions can be found XXXX.

Replacement blades for this saw should be XXXX and can be ordered from (Fastenal/McMaster?)