Bending Brake: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 1: Line 1:
==Bending Brake==
==Bending Brake==
[[File: Brake_1.JPG|400px|thumb|right|Brake]]
[[File: Brake_2.jpg|400px|thumb|right|Brake]]


This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees.  Maximum width is 50 inches.   
This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees.  Maximum width is 50 inches.   

Latest revision as of 04:09, 29 May 2017

Bending Brake

Brake

This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees. Maximum width is 50 inches.

Required Badge Required PPE

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Metal-1 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a Jet, model BPB 1650.