Difference between revisions of "Bending Brake"

From makerspace.tulane.edu
Jump to navigation Jump to search
(Bending Brake)
(Bending Brake)
Line 2: Line 2:
 
[[File: Brake_1.JPG|400px|thumb|right|Brake]]
 
[[File: Brake_1.JPG|400px|thumb|right|Brake]]
  
This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees.   
+
CURRENTLY OUT OF SERVICE AWAITING DELIVERY OF PARTS.  This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees.  Maximum width is 24 inches. 
  
 
===Machine Info===
 
===Machine Info===
This machine is a Pexto model PX-24.  Manuals can be found http://makerspace.tulane.edu/images/1/18/PX24_PX36.pdf  
+
This machine is a Pexto model PX-24.  Manuals can be found here:  http://makerspace.tulane.edu/images/1/18/PX24_PX36.pdf  
  
 
[[PPE]] instructions can be found XXXX.
 
[[PPE]] instructions can be found XXXX.

Revision as of 23:46, 23 December 2016

Bending Brake

Brake

CURRENTLY OUT OF SERVICE AWAITING DELIVERY OF PARTS. This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees. Maximum width is 24 inches.

Machine Info

This machine is a Pexto model PX-24. Manuals can be found here: http://makerspace.tulane.edu/images/1/18/PX24_PX36.pdf

PPE instructions can be found XXXX.