Bending Brake

From makerspace.tulane.edu
Revision as of 23:46, 23 December 2016 by Cedric (talk | contribs) (Bending Brake)
Jump to navigation Jump to search

Bending Brake

Brake

CURRENTLY OUT OF SERVICE AWAITING DELIVERY OF PARTS. This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees. Maximum width is 24 inches.

Machine Info

This machine is a Pexto model PX-24. Manuals can be found here: http://makerspace.tulane.edu/images/1/18/PX24_PX36.pdf

PPE instructions can be found XXXX.