Chase Schober: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
Line 21: Line 21:
Jason Schuster Parts:
Jason Schuster Parts:


Jason approached me with the engineering plans for an apparatus to assist in his bio-medical research. I took the fusion models that he created, and machined the four "slider" parts and then the stamp base using the Tormach PCNC 770. Becuase of the locomotive nature of the part, the tolerances had to be within ± .002". Each of the stamps required machining on both the top and bottom surface and so were flipped in the vice halfway through the operation. This was excellent experience in standardizing my measurement procedure and performing the operation so that the two cuts met each other smoothly.  
Jason approached me with the engineering plans for an adjustable cruciform to assist in his bio-medical research. He provided me with CAD models of four "slider" parts and one "stamp base". I imported them into Fusion 360, wrote the CAM, and machined the parts using the Tormach PCNC 770. Becuase of the locomotive nature of the sliders, each of their tolerances was ± .002". Each of the stamps required machining on both the top and bottom surface and so were flipped in the vice halfway through the operation. This was an excellent experience in standardizing my measurement procedure and performing the operation so that the two cuts met each other smoothly.  


The stamp base required the use of a T-slotter to route the hole for the sliders. I did research online to determine the feeds and speeds of the new tool and played around with the CAM extensively to ensure a smooth cut. Additionally, this part required machining on the top and bottom.  
The stamp base required the use of a T-slotter to route the hole for the sliders. I researched the appropriate feeds and speeds of the new tool and manipulated the CAM to produce a cut within specification. This part also required a vice flip in order to machine both sides.
 
The cruciform, made of the five machined components, is being actively used by Jason's research team, the Biomechanics of Growth and Remodeling Lab, at Tulane University.


[[File:Chase Schuster 2.png|300px]]  [[File:Chase Schuster 3.jpeg|300px]]  [[File:Chase Schuster 1.jpeg|300px]]
[[File:Chase Schuster 2.png|300px]]  [[File:Chase Schuster 3.jpeg|300px]]  [[File:Chase Schuster 1.jpeg|300px]]

Revision as of 03:36, 17 September 2017


MakerSpace Ninja

Email: cschober@tulane.edu

Phone: (504) 722-9514

Major: Engineering Physics

Graduation Date: May, 2018


Projects

  • CNC Mill

Over the summer of 2017, I logged over 300 hours on the Tormach PCNC 770 mill. After training with the available stock in the MakerSpace, I began to machine parts for various research groups on campus. These custom parts varied significantly in complexity and required tolerance. Here are some of the more comprehensive projects that I worked on with a description of their process and purpose.


Jason Schuster Parts:

Jason approached me with the engineering plans for an adjustable cruciform to assist in his bio-medical research. He provided me with CAD models of four "slider" parts and one "stamp base". I imported them into Fusion 360, wrote the CAM, and machined the parts using the Tormach PCNC 770. Becuase of the locomotive nature of the sliders, each of their tolerances was ± .002". Each of the stamps required machining on both the top and bottom surface and so were flipped in the vice halfway through the operation. This was an excellent experience in standardizing my measurement procedure and performing the operation so that the two cuts met each other smoothly.

The stamp base required the use of a T-slotter to route the hole for the sliders. I researched the appropriate feeds and speeds of the new tool and manipulated the CAM to produce a cut within specification. This part also required a vice flip in order to machine both sides.

The cruciform, made of the five machined components, is being actively used by Jason's research team, the Biomechanics of Growth and Remodeling Lab, at Tulane University.



Cryo-Optic Chamber:

Escarra Research Parts

Fidget Spinner:

Dice:

Spinning Army Star



  • CNC Lathe

Cryo-Optic Chamber Lid

Jarrod's Parts


  • Laser Engraver

Chess Board:

Arduino Enclosure:

Coasters:

Bowling Set: