Digital-1 Training: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 14: Line 14:


'''[https://makerspace.tulane.edu/Uploads/Training/Digital-1v2/index.html Digital-1 Presentation]'''
'''[https://makerspace.tulane.edu/Uploads/Training/Digital-1v2/index.html Digital-1 Presentation]'''
[https://makerspace.tulane.edu/Uploads/Training/Digital-1_Review.pdf '''Review Training Presentation''']


===Step Two (Optional)===
===Step Two (Optional)===
<--!Complete the following designs to demonstrate your ability to use the machines.
<!--Complete the following designs to demonstrate your ability to use the machines.


[[File:Digital_1_Tinkercad.JPG|150 px|thumb|frame|right|Tinkercad Design]]
[[File:Digital_1_Tinkercad.JPG|150 px|thumb|frame|right|Tinkercad Design]]

Latest revision as of 22:11, 21 April 2021

This is the basic training for use of the simpler digital rapid prototyping tools. Completion of the Digital-1 training allows access to

Step One

Read through the presentation linked below and complete the quiz at the end.

Digital-1 Presentation


Review Training Presentation

Step Two (Optional)

Backpack Tag

a) Laser cutter: Select a piece of thin plywood from the bin labelled "Digital 1," and design and make a backpack tag for that size piece of wood like the one in the picture. Use a vector graphics software package (Illustrator, Corel Draw, Inkscape) to lay out the tag and then use the laser cutter to fabricate it from a small piece of scrap plywood. The slot for the plastic loop should have inside dimensions of 5mm x 15mm. When your tag is complete, ask the Ninja for a plastic loop.