Difference between revisions of "Digital-1 Training"

From makerspace.tulane.edu
Jump to navigation Jump to search
Line 16: Line 16:
  
 
===Step Two (Optional)===
 
===Step Two (Optional)===
<--!Complete the following designs to demonstrate your ability to use the machines.
+
<!--Complete the following designs to demonstrate your ability to use the machines.
  
 
[[File:Digital_1_Tinkercad.JPG|150 px|thumb|frame|right|Tinkercad Design]]
 
[[File:Digital_1_Tinkercad.JPG|150 px|thumb|frame|right|Tinkercad Design]]

Revision as of 00:29, 1 September 2020

Digital 1.png

This is the basic training for use of the simpler digital rapid prototyping tools. Completion of the Digital-1 training allows access to

Step One

Read through the presentation linked below and complete the quiz at the end.

Digital-1 Presentation

Step Two (Optional)

Backpack Tag

a) Laser cutter: Select a piece of thin plywood from the bin labelled "Digital 1," and design and make a backpack tag for that size piece of wood like the one in the picture. Use a vector graphics software package (Illustrator, Corel Draw, Inkscape) to lay out the tag and then use the laser cutter to fabricate it from a small piece of scrap plywood. The slot for the plastic loop should have inside dimensions of 5mm x 15mm. When your tag is complete, ask the Ninja for a plastic loop.