File:Drill sizes.pdf

From makerspace.tulane.edu
Revision as of 19:54, 9 January 2016 by Cedric (talk | contribs) (Drill bits are labeled with 4 different size standards -- letters A-Z; numbers 1-80; fractional inches; and metric. This table shows all 4, with equivalencies. The range is from 0.014" to 1.000")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Go to page
next page →
next page →
next page →

Original file ‎(1,275 × 1,650 pixels, file size: 321 KB, MIME type: application/pdf, 2 pages)

Drill bits are labeled with 4 different size standards -- letters A-Z; numbers 1-80; fractional inches; and metric. This table shows all 4, with equivalencies. The range is from 0.014" to 1.000"

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current19:54, 9 January 2016Thumbnail for version as of 19:54, 9 January 20161,275 × 1,650, 2 pages (321 KB)Cedric (talk | contribs)Drill bits are labeled with 4 different size standards -- letters A-Z; numbers 1-80; fractional inches; and metric. This table shows all 4, with equivalencies. The range is from 0.014" to 1.000"

You cannot overwrite this file.

There are no pages that use this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://makerspace.tulane.edu/index.php?title=File:Drill_sizes.pdf&oldid=195111"