Difference between revisions of "FlexyDually Extruder TAZ 5"

From makerspace.tulane.edu
Jump to navigation Jump to search
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:LulzBot-FlexyDually-Mounted.JPG|200px|thumb|right|Example Image of FlexyDually Dual Extruder]]
+
[[File:LulzBot-FlexyDually-Mounted.JPG|250px|thumb|right|Example Image of FlexyDually Dual Extruder]]
 
The LulzBot TAZ 5 with the FlexyDually extruder has the advantage that it is able to print two filaments at once: one being a standard, hard plastic filament, for example [[ABS]] or [[PLA]], and the other a flexible filament, such as a dissolvable support material, like [[PVA]], or a rubber-like flexible material, like [[NinjaFlex]].
 
The LulzBot TAZ 5 with the FlexyDually extruder has the advantage that it is able to print two filaments at once: one being a standard, hard plastic filament, for example [[ABS]] or [[PLA]], and the other a flexible filament, such as a dissolvable support material, like [[PVA]], or a rubber-like flexible material, like [[NinjaFlex]].
  
 
Printing with this printer should be considered more advanced, and for most prints, the additional features are likely unnecessary. Additional configuration is necessary in [[Cura]] in order to properly use this printer.
 
Printing with this printer should be considered more advanced, and for most prints, the additional features are likely unnecessary. Additional configuration is necessary in [[Cura]] in order to properly use this printer.
  
Note that [[g-code]] prepared for the [[Hexagon Extruder TAZ 5]] will NOT behave the same on this printer. Prints will have to either be re-plated in [[Cura]] using the correct machine profile, or the [[g-code]] will have to be manually edited.
+
Note that [[g-code]] prepared for the single-extruder [[LulzBot TAZ 5]] will NOT behave the same on this printer. Prints will have to either be re-plated in [[Cura]] using the correct machine profile, or the [[g-code]] will have to be manually edited. Also note that the extruders on this printer have a maximum temperature of 240C, lower than the 300C maximum of the [[LulzBot TAZ 5]].
 +
 
 +
== Cura Configuration ==
 +
Open the LulzBot version of [[Cura]] and follow the following steps:
 +
 
 +
*Click the "Machine" drop-down menu and select "Add New Machine".
 +
*Select "LulzBot TAZ 4 or 5" and click next.
 +
*Select "Modified LulzBot TAZ 4 or 5" and click next.
 +
*Select "PEI" and click next.
 +
*Select "v1 (Budaschnozzle)" and click next.
 +
*Select "FlexyDually v1" and click next.
 +
*Click "Skip upgrade" and "Yes" on the warning that pops up.
 +
*Click "Finish".
 +
 
 +
== Recommended Print Configurations ==
 +
[[FlexyDually Extruder TAZ 5 Print Configurations]]
 +
 
 +
== Technical Details ==
 +
*0.5mm nozzle (both extruders)
 +
*240C maximum extruder temperature (both extruders)
 +
*120C maximum bed temperature
 +
*PEI print bed
 +
*Print Area: 298mm x 275mm x 250mm
 +
*Top Print Speed: 200mm/sec
 +
 
 +
== Bed Leveling ==
 +
The bed leveling procedure is the same as on the [[Hexagon Extruder TAZ 5]], with the exception that the leveling pattern has to be run for both extruders, and that different g-code files are required.
 +
 
 +
*Extruder 1 leveling pattern [[g-code]]: [[file:FlexyDuallyE1BedLevel.gcode]]
 +
*Extruder 2 leveling pattern [[g-code]]: [[file:FlexyDuallyE2BedLevel.gcode]]
 +
== Miscellaneous Notes ==

Latest revision as of 01:49, 30 September 2015

Example Image of FlexyDually Dual Extruder

The LulzBot TAZ 5 with the FlexyDually extruder has the advantage that it is able to print two filaments at once: one being a standard, hard plastic filament, for example ABS or PLA, and the other a flexible filament, such as a dissolvable support material, like PVA, or a rubber-like flexible material, like NinjaFlex.

Printing with this printer should be considered more advanced, and for most prints, the additional features are likely unnecessary. Additional configuration is necessary in Cura in order to properly use this printer.

Note that g-code prepared for the single-extruder LulzBot TAZ 5 will NOT behave the same on this printer. Prints will have to either be re-plated in Cura using the correct machine profile, or the g-code will have to be manually edited. Also note that the extruders on this printer have a maximum temperature of 240C, lower than the 300C maximum of the LulzBot TAZ 5.

Cura Configuration

Open the LulzBot version of Cura and follow the following steps:

  • Click the "Machine" drop-down menu and select "Add New Machine".
  • Select "LulzBot TAZ 4 or 5" and click next.
  • Select "Modified LulzBot TAZ 4 or 5" and click next.
  • Select "PEI" and click next.
  • Select "v1 (Budaschnozzle)" and click next.
  • Select "FlexyDually v1" and click next.
  • Click "Skip upgrade" and "Yes" on the warning that pops up.
  • Click "Finish".

Recommended Print Configurations

FlexyDually Extruder TAZ 5 Print Configurations

Technical Details

  • 0.5mm nozzle (both extruders)
  • 240C maximum extruder temperature (both extruders)
  • 120C maximum bed temperature
  • PEI print bed
  • Print Area: 298mm x 275mm x 250mm
  • Top Print Speed: 200mm/sec

Bed Leveling

The bed leveling procedure is the same as on the Hexagon Extruder TAZ 5, with the exception that the leveling pattern has to be run for both extruders, and that different g-code files are required.

Miscellaneous Notes