FlexyDually Extruder TAZ 5 Print Configurations: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
This page contains [[3d printing]] configuration information specific to the [[FlexyDually Extruder TAZ 5]].
This page contains [[3d printing]] configuration information specific to the [[FlexyDually Extruder TAZ 5]]. For preparing any print for this printer, make sure that you select "TAZ 5 (Flexydually V1)" under "Machine" in [[Cura]]. If that option is not present, you may need to follow the [[FlexyDually Extruder TAZ 5#Cura Configuration|Cura configuration instructions]] for this printer, or may need to install the latest LulzBot version of [[Cura]].


==PLA with PVA Support Material==
==PLA with PVA Support Material==

Revision as of 12:59, 29 September 2015

This page contains 3d printing configuration information specific to the FlexyDually Extruder TAZ 5. For preparing any print for this printer, make sure that you select "TAZ 5 (Flexydually V1)" under "Machine" in Cura. If that option is not present, you may need to follow the Cura configuration instructions for this printer, or may need to install the latest LulzBot version of Cura.

PLA with PVA Support Material