Grinder

From makerspace.tulane.edu
Jump to navigation Jump to search

Grinder #1

Grinder #1

This 8" grinding wheel is only to be used on steel or cast iron. The wheel on the right has a coarse grit, with fine grit on the left.

Machine Info

This machine is a Cincinnati Electric Tool model 102. We estimate that it's 75 years old, but this model is still in current production.

Manuals can be found XXXX

PPE instructions can be found XXXX.

Replacement grinding wheels should be 8" diameter with a 5/'" arbor, and can be ordered from Fastenal or McMaster.

Grinder #2

Grinder #2

This 6" buffer can be used on any material. There's a cloth buffing wheel on the left, and a brass wire brush on the right, recommended for aluminum and other soft metals.

Machine Info

This machine is a Black and Decker Antique.

We're still looking for a manual.

PPE instructions can be found XXXX.

Replacement buffing and wire wheels should be 6" diameter with a 1/2" arbor. They can be obtained from Harbor Freight, Lowes, Fastenal or McMaster.

Grinder #3

Grinder #3

This 8" grinding wheel is only to be used on steel or cast iron. There's a coarse wire brush on the left, good for polishing steel. The wheel on the right has a coarse grit, and is only to be used on steel or iron.

Machine Info

This machine is a Central Machinery (Harbor Freight) model S-595.

Manuals can be found http://makerspace.tulane.edu/index.php/File:Central_Machinery_8_inch_grinder_S-595.pdf

PPE instructions can be found XXXX.

Replacement wheels for this grinder should be have an 8" diameter with a 5/8" arbor. They can be ordered from Harbor Freight, Fastenal, or McMaster.