Difference between revisions of "Lathe CAM Training"

From makerspace.tulane.edu
Jump to navigation Jump to search
Line 6: Line 6:
 
-Download [[Media:CNC Lathe CAM Training.pdf]] or from [[https://tulane.box.com/s/dd9a27pb33rctukskxti80sa7z9kgf13]] and read through the entire document.
 
-Download [[Media:CNC Lathe CAM Training.pdf]] or from [[https://tulane.box.com/s/dd9a27pb33rctukskxti80sa7z9kgf13]] and read through the entire document.
  
-Download the [https://tulane.box.com/s/87kxavj8e1gxp1ml27l5inaago2iv2vo training piece] and
+
-Download the [https://tulane.box.com/s/87kxavj8e1gxp1ml27l5inaago2iv2vo training piece]
 
[https://tulane.box.com/s/n7hq3s4tqfvb0zncz3luk8e27lwu9l2l tool library]   
 
[https://tulane.box.com/s/n7hq3s4tqfvb0zncz3luk8e27lwu9l2l tool library]   
https://drive.google.com/open?id=1NFAMApO12PffHZbqoWEq8J-dEKXnL3mt
+
  and [http://cam.autodesk.com/posts/download.php?name=tormach%20pathpilot%20turning post-processor]  
  and [http://cam.autodesk.com/posts/download.php?name=tormach%20pathpilot%20turning post-processor] and ''complete'' the first two chapters, but '''read through the entire document''' and make note of anything you will want to ask your Training Ninja.
+
and then ''complete'' the first two chapters, but '''read through the entire document''' and make note of anything you will want to ask your Training Ninja.
  
 
-Once you have a .nc file, move on to step two.
 
-Once you have a .nc file, move on to step two.

Revision as of 19:30, 27 September 2018

CNC-Lathe.png

This is advanced training to teach the user how to perform CAM (Computer Aided Machining), on the Tormach 15L Slant Pro CNC Lathe.

Step One

-Download Media:CNC Lathe CAM Training.pdf or from [[1]] and read through the entire document.

-Download the training piece, tool library

and post-processor 

and then complete the first two chapters, but read through the entire document and make note of anything you will want to ask your Training Ninja.

-Once you have a .nc file, move on to step two.

Step Two

-Set up a time with a Training Ninja to complete the widget in person on the Tormach 15L Slant Pro CNC Lathe in the MakerSpace.

Training Ninjas

-Dylan (dlucia1)