Workshops: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
Line 4: Line 4:


Thanks for understanding and if you have any questions feel free to contact me.
Thanks for understanding and if you have any questions feel free to contact me.
[[Dr._Timothy_Schuler||T. Schuler]]
 
[[Dr._Timothy_Schuler|T. Schuler]]
<!--In Spring 2020 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace.  Classes meet in '''SE124''', the MakerSpace Project Room.  '''Enter from the alley next to Flower Hall.'''  Invitations are sent to all registered MakerSpace users early each week.  We have seating for 10 learners.  Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills.  Thanks to the Makers and Robotics Society (MARS) for developing the Inkscape and Fusion handouts.
<!--In Spring 2020 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace.  Classes meet in '''SE124''', the MakerSpace Project Room.  '''Enter from the alley next to Flower Hall.'''  Invitations are sent to all registered MakerSpace users early each week.  We have seating for 10 learners.  Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills.  Thanks to the Makers and Robotics Society (MARS) for developing the Inkscape and Fusion handouts.



Revision as of 00:03, 17 October 2020

Instructors Ian Pimenta and Robert Johnson with Physics Professor Jessica Graber, after Inkscape I workshop. photo credit: Prof. Katherine Raymond

Unfortunately, due to COVID-19 restrictions, we will not be able to hold workshops within the MakerSpace for now. We are working on a solution and users will be notified when we are again able to continue holding workshops. For now, you can still work through the guides posted below on your own.

Thanks for understanding and if you have any questions feel free to contact me.

T. Schuler


Inkscape I for Beginners


Inkscape II for intermediate users


Fusion360 I Introduction to 3D printing


Fusion360 II More features


File:Put a filename here CAD on the Carvey


File:Put a filename here Meshmixer for editing STL files