Workshops

From makerspace.tulane.edu
Revision as of 01:07, 13 February 2020 by Cedric (talk | contribs)
Jump to navigation Jump to search
Instructors Ian Pimenta and Robert Johnson with Physics Professor Jessica Graber, after Inkscape I workshop. photo credit: Prof. Katherine Raymond

In Spring 2020 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the Inkscape and Fusion handouts.

Date/Time Topic Instructors Pre-requisites
3/1/20 1:00PM Inkscape 1 Ian, Robert must bring a laptop computer with Inkscape installed
3/8/2020 1:00PM Fusion 2 for beginners * Kyra, Elena must bring a laptop computer with Fusion360 installed
3/15/2020 Inkscape 2 Robert, Ian requires Inkscape 1 or experience with Inkscape
  • complete "Inkscape I for Beginners" (below) beforehand

Handouts used in these seminars


MARS LaserWorkshop.pdf Inkscape I for Beginners


AdvancedLaserCutting Tree V2.pdf Inkscape II for intermediate users


Fusion Basics 02202019.pdf Fusion360 I Introduction to 3D printing


Fusion 360 Guide 4-11-18.pdf Fusion360 II More features


File:Put a filename here CAD on the Carvey


File:Put a filename here Meshmixer for editing STL files