Ultimaker 2
Revision as of 13:39, 29 September 2015 by Clayton.ford (talk | contribs) (Created page with "250px|thumb|right|Example Image of an Ultimaker 2 The Ultimaker 2 is likely the simplest of the 3d printers in the MakerSpace, and so is likely the...")
The Ultimaker 2 is likely the simplest of the 3d printers in the MakerSpace, and so is likely the easiest for beginners to 3d printing to get started with.
Contents
Cura Configuration
Open the LulzBot version of Cura and follow the following steps:
- Click the "Machine" drop-down menu and select "Add New Machine".
- Select "Other Printers" and click next.
- Select "Ultimaker 2" and click next.
- Click "Finish".
Recommended Print Configurations
Ultimaker 2 Print Configurations
Technical Details
- 0.4mm nozzle (both extruders)
- 260C maximum extruder temperature
- 100C maximum bed temperature
- Glass print bed
- Print Area: 223 x 223 x 205 mm
- Top Print Speed: 300mm/sec
Bed Leveling
The bed leveling procedure is a menu option on the Ultimaker 2. Select it and follow the on-screen instructions in order to level the bed.