Difference between revisions of "User:Jschust5"

From makerspace.tulane.edu
Jump to navigation Jump to search
Line 66: Line 66:
 
<br />
 
<br />
  
===Exorcist3D Youtube Page===
+
==Exorcist3D Youtube Page==
  
 
Here's my YouTube channel, several videos of my 3D printer and South Bend lathe are found here:
 
Here's my YouTube channel, several videos of my 3D printer and South Bend lathe are found here:
Line 73: Line 73:
  
  
===OpenSource 3D Printer===
+
==OpenSource 3D Printer==
  
 
In 2013, I built my own opensource 3D Printer.  I modified the Prusa i3 design.  Controlled by: Arduino Mega + RAMPS 1.5 with Sprinter firmware.
 
In 2013, I built my own opensource 3D Printer.  I modified the Prusa i3 design.  Controlled by: Arduino Mega + RAMPS 1.5 with Sprinter firmware.
Line 96: Line 96:
 
<br />
 
<br />
  
=== 1934 Southbend Lathe Restoration & Projects===
+
==1934 Southbend Lathe Restoration & Projects==
  
 
Over Christmas break 2017, I machined some small parts for my lab. These parts are cannula, used to mount soft tissues on our inflation-extension test device. The material is PEEK plastic, it can be auto-claved and machines nicely.  Check out my YouTube link above, there is a quick video of the PEEK being machined.  The lathe I used is a 1934 Southbend 9" Workbench 405. This lathe is a restoration project I completed in 2010.
 
Over Christmas break 2017, I machined some small parts for my lab. These parts are cannula, used to mount soft tissues on our inflation-extension test device. The material is PEEK plastic, it can be auto-claved and machines nicely.  Check out my YouTube link above, there is a quick video of the PEEK being machined.  The lathe I used is a 1934 Southbend 9" Workbench 405. This lathe is a restoration project I completed in 2010.
Line 111: Line 111:
 
<br />
 
<br />
  
===Last Update===
+
==Last Update==
 
[[User:Jschust5|JasonS]] 17 January 2018
 
[[User:Jschust5|JasonS]] 17 January 2018

Revision as of 04:42, 18 January 2018

  • I don't always wear a dress shirt and tie to the Makerspace, but when I do, you know I was photoshopped!
  • Bio

    I grew up on a farm, and have been a DIYer, Maker, Fabricator my whole life. I attended the University of Nebraska at Lincoln and earned a Bachelor's in Science in Mechanical Engineering. I then went to industry as a Design Engineer. In 2015, I was looking for a change from Agriculture and Construction equipment to the Biomedical Engineering field, Now at Tulane I am working towards a PhD as a Research Assistant with a goal of staying in academia and teaching new generations how awesome science and engineering is!

    If you see me in Makerspace, say hi and introduce yourself, I am always happy to help out.

    Outside of Tulane, my favorite activity is cycling, My favorite bicycle race is the Leadville 100MTB, it is an endurance mountain bike race with a 12 hour cutoff, riders must complete a 100 mile course, at an average elevation over 10,200 feet in Leadville, Colorado. My finishing record is 4 for 4.

    Jason Schuster

    Maker Ninja

    Graduate Student

    PhD Candidate

    Biomedical Engineering

    Lab Website: Biomechanics of Growth & Remodeling Lab

    Email: jschust5@tulane.edu


    Profile

    Maker Skills:

    • 3d Printing, Laser Cutter, Lathe, Mill, Woodworking, Sand casting
    • Welding: TIG, MIG, Stick, & Oxy-acetylene
    • 3D Printing: Cura, Sprinter Firmware, Slic3r,
    • Programming - LabVIEW, MATLAB, Mathematica
    • Learing - Slicer for Fusion 360, blender
    • Makerspace Training Certifications
    • Digital 1.png
    • CNC-Lathe.png
    • Metal 1.png
    • Metal 2.png
    • Wood 1.png
    • Wood 2.png


    Tulane Makerspace Project Portfolio

    • Made on the Carvey - 2 Color HDPE
    • Tissue Stamp - CNC Milled Precision Stamping Fixture
    • Tissue Stamp - CNC Milled Precision Stamping Fixture
    • Tissue Stamp - Laser Cut Acrylic


    Exorcist3D Youtube Page

    Here's my YouTube channel, several videos of my 3D printer and South Bend lathe are found here:

    Exorcist3D YouTube Channel


    OpenSource 3D Printer

    In 2013, I built my own opensource 3D Printer. I modified the Prusa i3 design. Controlled by: Arduino Mega + RAMPS 1.5 with Sprinter firmware. The frame is made from 1/4" laser cut steel plates and 3/4" lathe turned rods. The build surface is heated and 10" x 10" x 10". Recently, I made several improvements and upgrades, which include a large screen graphical LCD with SD card reader and a genuine E3D titan extruder. Future upgrades include a BL Touch auto bed level and 1.75mm E3D V6 Nozzle.

       Several of the parts I printed in the Makerspace:
       * Tan LCD display box
       * Purple X-axis belt tension bracker
       * Purple Arduino & Ramps box
       * Purple Printer cooler fan shroud
    


    • Exorcist3D Printer
    • 3mm Budaschnozzle to be replaced
    • View from above
    • Upgrades Waiting: 1.75mm E3D V6 & BL Touch


    1934 Southbend Lathe Restoration & Projects

    Over Christmas break 2017, I machined some small parts for my lab. These parts are cannula, used to mount soft tissues on our inflation-extension test device. The material is PEEK plastic, it can be auto-claved and machines nicely. Check out my YouTube link above, there is a quick video of the PEEK being machined. The lathe I used is a 1934 Southbend 9" Workbench 405. This lathe is a restoration project I completed in 2010.

    • 3.0mm Cannula
    • 1/8"NPT to 3.8mm Cannula
    • 1934 Southbend 405 Lathe
    • X-axis fine adjustment
    • Updated tooling post


    Last Update

    JasonS 17 January 2018