Tormach CNC Lathe

From makerspace.tulane.edu
Jump to navigation Jump to search
  • Careful with chamfer operations as the tool will cut in a diagonal past the limits that you identify.
  • Parting tool is .161" wide and the zero of the tool is on the right side
  • Always reference the Z axis first.
  • If the axis doesn't move when you attempt to ref X or Z after a restart, go to the settings tab and make sure that the "Disable reference switches" box is unchecked.
  • Make sure the chuck key is never left in the spindle because it will go flying through the protective acryllic.
  • Once you have put your stock in the spindle, give it a spin to make sure you have properly secured your workpiece.
  • Use 1 and 1/8" hex to loosen quick change tool post holder.

Feeds:

http://littlemachineshop.com/reference/cuttingspeeds.php