View source for Testing and Measurement

==Electronic Testing and Measurement System==
The Tulane MakerSpace has a set of electronic sensors that can be used to measure various properties of objects and devices.  Our sensors are made by Vernier, and data can be recorded on any computer with a Vernier LabPro interface connected and the Vernier [[LoggerPro]] software.  While the equipment is available for all students to use, please '''do not remove it''' from the MakerSpace.

The LoggerPro software is also capable of performing frame-by-frame analysis of images and video captured via webcam, thus allowing measurements to be made in the field or at other locations without the use of the electronic sensors.

T. Schuler

===Available Equipment===
*[http://www.vernier.com/products/interfaces/labpro/ Vernier LabPro Interface] (x2)
*[https://www.pasco.com/prodCatalog/CI/CI-6538_rotary-motion-sensor/index.cfm Rotary Motion Sensor]
*[http://www.vernier.com/products/sensors/force-sensors/dfs-bta/ Dual-Range Force Sensor]
*[http://www.vernier.com/products/sensors/motion-detectors/md-btd/ Ultrasonic Motion Detector] (x2)
*[http://www.vernier.com/products/sensors/accelerometers/3d-bta/ 3-Axis Accelerometer] (x2)
*[http://www.vernier.com/products/sensors/temperature-sensors/tmp-bta/ Temperature Probe]
*[http://www.vernier.com/products/sensors/temperature-sensors/tca-bta/ Thermocouple]
*[http://www.vernier.com/products/sensors/voltage-probes/dvp-bta/ Voltage Sensor]
*[http://www.vernier.com/products/sensors/current-sensors/dcp-bta/ Current Sensor]
*[https://www.vernier.com/products/sensors/mg-bta/ Magnetic Field Sensor (Hall Probe)]