From makerspace.tulane.edu
Jump to navigation
Jump to search
|
|
| (2 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| [[File:TAZ5.PNG|250px|thumb|right|Example Image of Lulzbot TAZ 5]] | | #REDIRECT [[LulzBot TAZ 5]] |
| The LulzBot TAZ 5 has a number of advantages over the [[Ultimaker 2]]. These include a larger extruder nozzle, allowing for faster printing, a larger build volume, an extruder with the ability to use a wide range of filaments, and generally better print quality and a more robust design. The PEI print surface makes bed preparations, such as glue stick, unnecessary for PLA and ABS printing.
| |
| | |
| == Cura Configuration ==
| |
| Open the LulzBot version of [[Cura]] and follow the following steps:
| |
| | |
| *Click the "Machine" drop-down menu and select "Add New Machine".
| |
| *Select "LulzBot TAZ 4 or 5" and click next.
| |
| *Select "Stock TAZ 5 (PEI & v2)" and click next.
| |
| *Select "0.5 mm" and click next.
| |
| *Click "Finish".
| |
| | |
| == Recommended Print Configurations ==
| |
| [[Hexagon Extruder TAZ 5 Print Configurations]]
| |
| | |
| == Technical Details ==
| |
| *0.5mm nozzle
| |
| *300C maximum extruder temperature
| |
| *120C maximum bed temperature
| |
| *PEI print bed
| |
| *Print Area: 298mm x 275mm x 250mm
| |
| *Top Print Speed: 200mm/sec
| |
| | |
| == Bed Leveling ==
| |
| The bed leveling procedure...
| |
| == Miscellaneous Notes ==
| |
Latest revision as of 14:31, 29 September 2015