Bandsaw: Difference between revisions
| Line 40: | Line 40: | ||
==Bandsaw #4== | ==Bandsaw #4== | ||
[[File: Bandsaw_4.JPG|200px|thumb|right|Bandsaw #4]] | [[File: Bandsaw_4.JPG|200px|thumb|right|Bandsaw #4]] | ||
This is a small bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Larger wood cuts should be made on Bandsaw #3, also located in the Wood Shop. | This is a small bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Larger wood cuts should be made on Bandsaw #3, also located in the Wood Shop. This is a small saw, best for detail work. Maximum cut depth is 4.5" and the throat is 9.5" wide | ||
===Machine Info=== | ===Machine Info=== | ||
This machine is a Crafstman model | This machine is a Crafstman model 321-214000. | ||
Manuals can be found XXXX, | Manuals can be found XXXX, | ||
| Line 49: | Line 49: | ||
[[PPE]] instructions can be found XXXX. | [[PPE]] instructions can be found XXXX. | ||
Replacement blades for this saw should be | Replacement blades for this saw should be 70.5" long and up to 1/2" wide. They can be ordered from Fastenal or McMaster. | ||
==Horizontal Bandsaw #1== | ==Horizontal Bandsaw #1== | ||
Revision as of 21:26, 8 January 2017
Bandsaw #1
This is an extremely large bandsaw which is normally used for cutting metal stock or sheets.
Machine Info
This machine is a Powermatic Model 87.
The manual can be found here Powermatic Band Saw manual (.pdf) Another version can be found here Powermatic Band Saw manual v.2 (.pdf)
PPE instructions can be found XXXX.
Replacement blades for this saw should be 149" to 152" long, up to 1" wide.
Bandsaw #2
This bandsaw may be used for cutting smaller metal stock or plastic.
Machine Info
This machine is a Craftsman model 351-243981.
Manuals can be found at Craftsman band saw
PPE instructions can be found XXXX.
Replacement blades for this saw should be 133" long, and 3/16" to 1" wide.
Bandsaw #3
This is a large bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Small wood cuts should be made on Bandsaw #4, also located in the Wood Shop.
Machine Info
This machine is a Jet model JWBS-16B.
Manuals can be found at Jet band saw
PPE instructions can be found XXXX.
Replacement blades for this saw should be 123" long.
Bandsaw #4
This is a small bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Larger wood cuts should be made on Bandsaw #3, also located in the Wood Shop. This is a small saw, best for detail work. Maximum cut depth is 4.5" and the throat is 9.5" wide
Machine Info
This machine is a Crafstman model 321-214000.
Manuals can be found XXXX,
PPE instructions can be found XXXX.
Replacement blades for this saw should be 70.5" long and up to 1/2" wide. They can be ordered from Fastenal or McMaster.
Horizontal Bandsaw #1
This is a powerful bandsaw specifically used for cutting metal or plastic rods, tubes, and pipes. It is designed to automatically shut off when the cut is completed, and it has a clamp to hold the stock while it's cutting. Be sure to place a waste container under the chute that directs chips away from the cutting area. Stock up to 5" wide can be cut. The blade in the machine is optimized for metal and plastic. Do not use it to cut wood.
Machine Info
This machine is a Jet model 414458.
The manual can be found here Jet Horizontal Band Saw manual (.pdf)
PPE instructions can be found XXXX.
Replacement blades for this saw should be 64.5" x 0.5" and can be ordered from Amazon. Recommended metal cutting blade is Bosch BS6412-24M