Tormach CNC Milling Machine: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
This machine is covered under the '''CNC''' training. Users who have not completed this training cannot use this machine. | This machine is covered under the '''CNC''' training. Users who have not completed this training cannot use this machine. | ||
CNC: | |||
#When facing with a superfly on aluminum, use 2500 RPM, 12 ipm | |||
#When facing with a 1/2" on aluminum, use 5000 RPM, 12 IPM | |||
Revision as of 20:39, 9 June 2017
| Required Badge | Required PPE | ||||
|---|---|---|---|---|---|
 |
 |
 |
 |
 |
|
Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.
This machine is covered under the CNC training. Users who have not completed this training cannot use this machine.
CNC:
- When facing with a superfly on aluminum, use 2500 RPM, 12 ipm
- When facing with a 1/2" on aluminum, use 5000 RPM, 12 IPM