User:Jschust5: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
Line 4: Line 4:
==Bio==
==Bio==


I grew up  on a farm, and have been a DIYer, Maker, Fabricator my whole life. I attended the University of Nebraska at Lincoln and earned a Bachelor's in Science in Mechanical Engineering.  I then went to industry as a Design Engineer.  In 2015, I was looking for a change from Agriculture and Construction equipment to the Biomedical Engineering field.
This is my homepage, which I don't use.
 
If you see me in Makerspace, say hi and introduce yourself, I am always happy to help out. 
 
Outside of Tulane, my favorite activity is cycling. My favorite bicycle race is the Leadville 100MTB, it is an endurance mountain bike race with a 12 hour cutoff, riders must complete a 100 mile course at an average elevation over 10,200 feet in Leadville, Colorado.  My finishing record is 4 for 4.
[http://www.leadvilleraceseries.com Leadville Race Series website]


'''Jason Schuster'''
'''Jason Schuster'''

Revision as of 14:16, 26 September 2018

  • I don't always wear a dress shirt and tie to the Makerspace, but when I do, you know I was photoshopped!

    • Bio

    This is my homepage, which I don't use.

    Jason Schuster

    Maker Ninja

    PhD Candidate

    Department of Biomedical Engineering

    Lab Website: Biomechanics of Growth & Remodeling Lab

    Email: jschust5@tulane.edu

    Maker Skills:

    • 3d Printing, Laser Cutter, Lathe, Mill, Woodworking, Sand casting
    • Welding: TIG, MIG, Stick, & Oxy-acetylene
    • 3D Printing: Cura, Sprinter Firmware, Slic3r,
    • Programming - LabVIEW, MATLAB, Mathematica
    • Learing - Slicer for Fusion 360, blender
    • Makerspace Training Certifications


    Tulane Makerspace Project Portfolio

    • Made on the Carvey - 2 Color HDPE
    • Tissue Stamp - CNC Milled Precision Stamping Fixture
    • Tissue Stamp - CNC Milled Precision Stamping Fixture
    • Tissue Stamp - Laser Cut Acrylic


    Exorcist3D YouTube Channel

    Here's my YouTube channel, several videos of my 3D printer and South Bend lathe are found here:

    Exorcist3D YouTube Channel


    OpenSource 3D Printer

    In 2013, I built my own opensource 3D Printer. I modified the Prusa i3 design. Controlled by: Arduino Mega + RAMPS 1.5 with Sprinter firmware. The frame is made from 1/4" laser cut steel plates and 3/4" lathe turned rods. The build surface is heated and 10" x 10" x 10". Recently, I made several improvements and upgrades, which include a large screen graphical LCD with SD card reader and a genuine E3D titan extruder. Future upgrades include a BL Touch auto bed level and 1.75mm E3D V6 Nozzle. 

       Several of the parts I printed in the Makerspace:
   * Tan LCD display box
   * Purple X-axis belt tension bracker
   * Purple Arduino & Ramps box
   * Purple Printer cooler fan shroud


    • Exorcist3D Printer
    • 3mm Budaschnozzle to be replaced
    • View from above
    • Upgrades Waiting: 1.75mm E3D V6 & BL Touch


    1934 South Bend Lathe Restoration & Projects

    Over Christmas break 2017, I machined some small parts for my lab. These parts are cannula, used to mount soft tissues on our inflation-extension test device. The material is PEEK plastic, it can be auto-claved and machines nicely. Check out my YouTube link above, there is a quick video of the PEEK being machined. The lathe I used is a 1934 Southbend 9" Workbench 405. This lathe is a restoration project I completed in 2010.

    • 3.0mm Cannula
    • 1/8"NPT to 3.8mm Cannula
    • 1934 Southbend 405 Lathe
    • X-axis fine adjustment
    • Updated tooling post


    Last Update

    JasonS 17 January 2018

    Retrieved from "http://makerspace.tulane.edu/index.php?title=User:Jschust5&oldid=197663"