Workshops: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
Line 54: Line 54:
|instructors TBA
|instructors TBA
|}
|}
Water jet cutter (hands-on, enrollment limit = 4):  Dylan and Robert, instructors - extensive pre-req at http://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training
Sat October 19
Sat November 9




Revision as of 14:14, 16 September 2019

Instructors Ian Pimenta and Robert Johnson with Physics Professor Jessica Graber, after Inkscape I workshop. photo credit: Prof. Katherine Raymond

In Fall 2019 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the handouts.

Date/Time Topic Instructors Pre-requisites
10/5/19 9:30AM Inkscape II for intermediate users Robert, Ian? Some experience designing with Inkscape. Bring laptop with Inkscape installed.
11/3/19 9:30AM Inkscape II for intermediate users Robert, Ian? Some experience designing with Inkscape. Bring laptop with Inkscape installed.
9/28/19 9:30AM Fusion360 I Introduction for beginners Elena, Kyra Install Fusion360 software on your laptop and bring it to class
10/26/19 9:30AM Fusion360 I Introduction for beginners Elena, Kyra Install Fusion360 software on your laptop and bring it to class
10/19/19 9:30AM Water Jet Cutter Dylan?, Robert must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand
11/9/19 9:30AM Water Jet Cutter Dylan?, Robert must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand
Fall 2019 date TBA CAD on the Carvey (requires Fusion360 I) instructors TBA
Fall 2019 date TBA Inkscape I for beginners Robert, Ian
Fall 2019 date TBA Fusion360 II More features instructors TBA


Handouts used in these seminars

Inkscape I for Beginners

Inkscape II for intermediate users

Fusion360 I Introduction to 3D printing

Fusion360 II More features

File:Put a filename here CAD on the Carvey

File:Put a filename here Meshmixer for editing STL files

Retrieved from "http://makerspace.tulane.edu/index.php?title=Workshops&oldid=198263"